Conference Review: 12th Confocal Raman Imaging Symposium

Skip to Navigation


  • Published: Oct 15, 2015
  • Source: WITec
  • Channels: Raman / Infrared Spectroscopy
thumbnail image: Conference Review: 12th Confocal Raman Imaging Symposium

Ulm, Germany. October 15, 2015.

At first glance cement, cancer cells, interstellar dust, two-dimensional materials, billion-year-old microfossils, emulsions and the Kramers-Heisenberg-Dirac formula appear to have little if anything in common. Yet they were all among the topics discussed by some 50 biologists, physicists, pharmaceutical researchers and chemists within the context of Raman Imaging. For the twelfth time WITec, the German manufacturer of Raman imaging systems, had invited scientists from all over the world to an interdisciplinary symposium in Ulm (Germany) at the end of September.

Though the constituent sessions were grouped conventionally in areas of interest such as Materials Science, Life Science, 2D Materials and Geosciences, there were also underlying interdisciplinary connections in addition to Raman imaging as the common investigative technique. An example was the analysis of everyday materials whose features and production processes are still not fully understood at the molecular level.

While two billion tons of cement are used every year worldwide, the associated chemical reactions and their kinetics during the production of clinker from limestone and silicate materials remain partially obscure. Using Raman imaging, Mika Lindén from the University of Ulm (Germany) identified and located various phases during the hydration of clinker, one of the steps in the production of cement. Production processes in glass fabrication also continue to be investigated as Ralf Seuwen from Schott Glass in Mainz (Germany) explained. He uses Raman spectroscopy to find the source of bubbles in glasses. As the composition of a bubble’s gas indicates its origin, Raman spectroscopy applied in the production line can reduce waste and improve the manufacturing process. The food production industry also takes advantage of Raman imaging. Maria Sovago from Unilever in Vlaardingen (The Netherlands) analyzed the molecular composition of emulsions and showed how monoglycerides at the interface between oil drops and the aqueous phase as well as crystalline lipids stabilize emulsions.

Martin Hilchenbach and Frédéric Foucher are both undertaking exploratory work that will ultimately lead to Raman analyses being conducted on materials in outer space. The ESA Rosetta spacecraft carries a secondary ion mass spectrometer (SIMS) to investigate dust from the comet 67P/Churyumov-Gerasimenko. On Earth Hilchenbach, of the Max-Planck-Institute for Solar System Research in Göttingen (Germany), evaluates reference materials from meteorites with Raman imaging and SIMS. Raman has been shown capable of detecting contaminations with great sensitivity. Using these results he intends to calibrate the SIMS on the spacecraft.

Foucher from the Center for Molecular Biophysics in Orléans (France) searches for traces of microbial remains in Martian rocks, one of the aims of future Mars missions. In preparation he analyzed fossilized, 800 Ma old microbes from the Draken Formation in Svalbard. Though Raman spectroscopy is very sensitive to both organic and mineral compounds it is difficult to distinguish them in a fossilized state. Foucher however succeeded in identifying specific signatures associated with biotic microfossils by performing Raman mapping instead of single spot analysis. Exactly how a space-qualified Raman imaging system can be miniaturized for a journey to Mars remains an outstanding challenge.

Back in terrestrial exploration, surprising data with the potential for technological applications were presented by José Fernández from the Institute for Ceramics and Glass in Madrid (Spain). He observed by confocal Raman microscopy that changing the polarization of the Raman laser can move ferroelectric domain walls of BaTiO3 single crystals. With the AFM mounted on the Raman microscope he correlated the local changes with the topography there. As BaTiO3 is a perovskite, applications of this effect in random access memories or piezoelectric actuators are conceivable.

While Raman imaging has long been used in materials sciences and geosciences, it only recently gained a foothold in life sciences. The majority of the posters this year dealt with biological, medical and pharmaceutical research, ranging from the detection of nano-plastics in the Baltic Sea to the imaging of living cells. Two of the contributed talks also emerged from life science: Carmen Lawatschek from Humboldt University in Berlin (Germany) showed how Raman imaging can accelerate the screening of peptide sequences for drug binding. Samir El-Mashtoly from the University of Bochum (Germany) described how this technology can be used to study cellular responses of specific tyrosine kinase inhibitors that bind to extracellular receptors known to play important roles in cancer development. His results indicate that non-invasive Raman microscopy could be a useful tool in studying the action and pharmacokinetics of drugs.

These contributions were preceded by an overview from Halina Abramczyk of the laboratory of Laser Molecular Spectroscopy in Lodz (Poland) on Raman investigations of breast cancer. In addition to structural studies she identified carotenoids, mammaglobin and specific fatty acids as Raman diagnostic markers for breast cancer prognosis. Dominique Lunter from the University of Tübingen (Germany) presented a confocal Raman microscopy-based methodology for investigating the drug contents and their distribution in an ex vivo pig skin assay.

Interdisciplinary conferences such as our Raman symposium thrive on research being communicated across fields, accessible to those whose expertise lies elsewhere. There were however no constraints on physicists characteristically challenging their audience. At the beginning it was Sebastian Schlücker from the University of Duisburg-Essen (Germany) who not only reviewed the history of Raman spectroscopy up through its latest imaging variants, he also presented the fundamentals of resonance Raman scattering, molecular vibrations and symmetry using the example of the water molecule. Glen Birdwell from the US Army Research Laboratory in Adelphi (USA) cast light on the subtle interactions between layers of bifold graphene whose stacking configurations exhibit different properties. He presented data that allows for a comparison of the positions of the superlattice-related Raman modes with existing theory.

Finally, the poster award was given to the physicist Kishan Thodkar from the University of Basel (Switzerland). He analyzed the shifts in the position of graphene’s 2D peaks as a marker of how temperature influences the formation of nano-gaps in CVD graphene. Using large Raman imaging scans of graphene’s D, G and 2D peaks he also documented the effects of solvent cleaning on graphene field – effect transistors.

This short review offers only a glimpse of the topics presented at the 12th Symposium on Confocal Raman Imaging, which was a great success in providing a format for the exchange of ideas and developments in Raman imaging and their applications in science and industry. The meeting was accompanied by a half-day Raman Imaging School and a full day demonstration of equipment at WITec’s headquarters in Ulm.

The 13th Confocal Raman Imaging Symposium will be held from September 26 to 28, 2016 in Ulm, Germany.

Find more pictures on

About WITec

WITec is the leading German manufacturer of confocal and scanning-probe microscopes for state-of-the-art Raman, Atomic Force (AFM), RISE (Raman Imaging and Scanning Electron) Microscopy and Scanning Near-Field Optical Microscopy (SNOM). WITec’s headquarters is located in Ulm, Germany, where all WITec products are developed and produced. Branch offices in USA, Japan, Singapore, and Spain ensure a worldwide sales and support network. From the company’s founding in 1997, WITec has been distinguished by its innovative product portfolio and a microscope design that enables combinations of the various imaging techniques within one system. An exemplar of the company’s breakthrough development is the world’s first integrated Raman-AFM microscope. To this day, WITec’s confocal microscopes are unrivaled in sensitivity, resolution and imaging capabilities. Significant innovation awards document WITec’s enduring success and innovative strength. For more information, please visit

Social Links

Share This Links

Bookmark and Share


Suppliers Selection
Societies Selection

Banner Ad

Click here to see
all job opportunities

Most Viewed

Copyright Information

Interested in separation science? Visit our sister site

Copyright © 2017 John Wiley & Sons, Inc. All Rights Reserved