Analysis of Traces in Polymers

Skip to Navigation

Application Note

  • Published: May 11, 2012
  • Author: Thermo Scientific
  • Copyright: Thermo Fisher Scientific
  • Suppliers: Thermo Fisher Scientific
  • Products: X-ray
  • Channels: X-ray Spectrometry

Most polymerisation processes used to create modern plastic materials need the assistance of catalytic substances containing elements such as aluminum, titanium or zinc. Yet, it is vital to minimize the presence of catalysts in the finished product, in order to maintain its desirable properties.

In addition to catalysts a number of other charges and additives - plasticisers, lubricants, stabilizing agents, neutralisers, antioxidants, pigments – are used in the production process. These products contain elements such as magnesium (Mg), iron (Fe), aluminum (Al), phosphorous (P), chlorine (Cl), calcium (Ca), chromium (Cr) or titanium (Ti).

Therefore, it is necessary to conduct elemental analyses on the finished polymer in order to optimize control over processing. Plastics are generally electrical insulators, resistant to acids and therefore difficult to put into solution. This makes X-ray fluorescence the preferred method to obtain rapid and precise analyses for all the elements ofp>

Read the full Application Note - AN41658 (PDF: 410 KB)

Social Links

Share This Links

Bookmark and Share

Microsites

Suppliers Selection
Societies Selection

Banner Ad

Click here to see
all job opportunities

Most Viewed

Copyright Information

Interested in separation science? Visit our sister site separationsNOW.com

Copyright © 2017 John Wiley & Sons, Inc. All Rights Reserved